Search results for: 'rail'

Clamp On Wheel Stop For 60 lb to 85 lb ASCE rails including 60 lb ASCE, 65 lb ASCE, 70 lb ASCE, 75 lb ASCE, 80 lb ASCE and 85 lb ASCE. Mounting bolts are provided. Install on both rails where there are two rails, 2 required. Not suitable for all applications such as where rails are embedded in pavement, consult with an application engineer. NOT RATED FOR IMPACT LOADS.

MADE TO ORDER ITEM ALLOW 2-3 WEEKS TO SHIP.

Our single shoulder tie plates protects the ties against wear and helps maintain gauge. The single shoulder design prevents outward expansion of the rails. These plates are 9" or 10" long and 7" wide, and is normally punched with four 11/16" spikes holes, so that the rail base overlaps 1/16" of the holes. Generally 5/8" spikes are recommended for 85 lb ASCE rails.

We can punch these tie plates for other sizes of rail, choose your rail size below or contact us to discuss your needs. These plates could be punched for 40 lb, 50 lb, 60 lb, 65 lb, 70 lb, 75 lb, 80 lb, or 90 lb rails of various sections including ASCE, RA, RB RE, MoPac, Can Pac, PS, PRR, CB&Q, SOO LINE, D&RG, Great Northern, C&NW, AREA, ARA-A and ARA-B among others. Depending on your application they may even be suitable for 100 and 115 lb rail sections. Always consult with an engineer about your specific application.  Typically when punched for smaller rails we place one hole opossite the shoulder, with 2 in the shoulder allowing for 3 spikes to be used.

Clamp On Wheel Stop For 30 lb to 40 lb ASCE rails. Mounting bolts are provided. Install on both rails where there are two rails, 2 required.

Clamp On Wheel Stop For 12 lb to 25 lb ASCE rails including 12 lb ASCE, 16 lb ASCE, 20 lb ASCE and 25 lb ASCE. Mounting bolts are provided. Install on both rails where there are two rails, 2 required.

Kimes Steel's light rail tie plate of forged steel is used for 40 lb per yard ASCE rails. It protects the ties against wear and helps maintain gauge. The single shoulder design prevents outward expansion of the rails. This plate can be ordered in 1/4" and 3/8" thick materials. The 1/4" thick plates are 4" wide x 6" long and the 3/8" plates are 5" wide and 6" long. These plates are normally punched with four 9/16" spike holes, so that the rail base overlaps 1/16" of the holes. Tie plates of other widths and hole punching can be furnished upon request. 1/2" spikes are normally recommended for 40 lb rail.

Kimes Steel's light rail tie plate of forged steel is used for 40 lb per yard ASCE rails. It protects the ties against wear and helps maintain gauge. The single shoulder design prevents outward expansion of the rails. This plate can be ordered in 1/4" and 3/8" thick materials. The 1/4" thick plates are 4" wide x 6" long and the 3/8" plates are 5" wide and 6" long. These plates are normally punched with four 9/16" spike holes, so that the rail base overlaps 1/16" of the holes. Tie plates of other widths and hole punching can be furnished upon request. 1/2" spikes are normally recommended for 40 lb rail.

Kimes Steel's light rail tie plate of forged steel is used for 30 lb per yard ASCE rails. It protects the ties against wear and helps maintain gauge. The single shoulder design prevents outward expansion of the rails. This plate is 1/4" thick, 6" long and 4" wide, and is normally punched with four 7/16" spike holes, so that the rail base overlaps 1/16" of the holes. Tie plates of other widths and hole punching can be furnished upon request. Generally 3/8" spikes are recommended for 12 lb rail.

Kimes Steel's light rail tie plate of forged steel is used for 25 lb per yard ASCE rails. It protects the ties against wear and helps maintain gauge. The single shoulder design prevents outward expansion of the rails. This plate is 1/4" thick, 6" long and 4" wide, and is normally punched with four 7/16" spike holes, so that the rail base overlaps 1/16" of the holes. Tie plates of other widths and hole punching can be furnished upon request. Generally 3/8" spikes are recommended for 12 lb rail.

Kimes Steel's light rail tie plate of forged steel is used for 20 lb per yard ASCE rails. It protects the ties against wear and helps maintain gauge. The single shoulder design prevents outward expansion of the rails. This plate is 1/4" thick, 6" long and 4" wide, and is normally punched with four 7/16" spike holes, so that the rail base overlaps 1/16" of the holes. Tie plates of other widths and hole punching can be furnished upon request. Generally 3/8" spikes are recommended for 12 lb rail.

Kimes Steel's light rail tie plate of forged steel is used for 16 lb per yard ASCE rails. It protects the ties against wear and helps maintain gauge. The single shoulder design prevents outward expansion of the rails. This plate is 1/4" thick, 6" long and 4" wide, and is normally punched with four 7/16" spike holes, so that the rail base overlaps 1/16" of the holes. Tie plates of other widths and hole punching can be furnished upon request. Generally 3/8" spikes are recommended for 12 lb rail.