Search results for: 'rail clip no. 62'

Rail Clip No. 114 12 lb, 20 lb, 25 lb, 30 lb to 40 lb ASCE Rail 21/32" DIA Hole 0.65 lbs each

Rail Clip No. 106 for 60 lb, 65 lb, 70 lb, 75 lb, 80 lb, 85 lb, 90 lb and 100 lb ASCE Rails 1-1/16" x 25/32" Hole, Clips can be used on both bolted and welded applications. 1.3 lbs each

Rail Clip No. 62 for 115 lb, 131 lb, 132 lb, 130 lb PS And AREA Rails 1-1/16" Hole, Clips can be used on both bolted and welded applications. 1.3 lbs each

40 lb, 60 lb, 65 lb, 70 lb, 75 lb, 80 lb or 85 lb Stationary Clip About 4" Long with 2 round 9/16" holes, bolt on or weld on. 0.9 lb each

Clamp On Wheel Stop For 60 lb to 85 lb ASCE rails including 60 lb ASCE, 65 lb ASCE, 70 lb ASCE, 75 lb ASCE, 80 lb ASCE and 85 lb ASCE. Mounting bolts are provided. Install on both rails where there are two rails, 2 required. Not suitable for all applications such as where rails are embedded in pavement, consult with an application engineer. NOT RATED FOR IMPACT LOADS.

MADE TO ORDER ITEM ALLOW 2-3 WEEKS TO SHIP.

Kimes Steel's light rail tie plate of forged steel is used for 40 lb per yard ASCE rails. It protects the ties against wear and helps maintain gauge. The single shoulder design prevents outward expansion of the rails. This plate can be ordered in 1/4" and 3/8" thick materials. The 1/4" thick plates are 4" wide x 6" long and the 3/8" plates are 5" wide and 6" long. These plates are normally punched with four 9/16" spike holes, so that the rail base overlaps 1/16" of the holes. Tie plates of other widths and hole punching can be furnished upon request. 1/2" spikes are normally recommended for 40 lb rail.

Kimes Steel's light rail tie plate of forged steel is used for 40 lb per yard ASCE rails. It protects the ties against wear and helps maintain gauge. The single shoulder design prevents outward expansion of the rails. This plate can be ordered in 1/4" and 3/8" thick materials. The 1/4" thick plates are 4" wide x 6" long and the 3/8" plates are 5" wide and 6" long. These plates are normally punched with four 9/16" spike holes, so that the rail base overlaps 1/16" of the holes. Tie plates of other widths and hole punching can be furnished upon request. 1/2" spikes are normally recommended for 40 lb rail.

Our single shoulder tie plates protects the ties against wear and helps maintain gauge. The single shoulder design prevents outward expansion of the rails. These plates are 9" or 10" long and 7" wide, and is normally punched with four 11/16" spikes holes, so that the rail base overlaps 1/16" of the holes. Generally 5/8" spikes are recommended for 85 lb ASCE rails.

We can punch these tie plates for other sizes of rail, choose your rail size below or contact us to discuss your needs. These plates could be punched for 40 lb, 50 lb, 60 lb, 65 lb, 70 lb, 75 lb, 80 lb, or 90 lb rails of various sections including ASCE, RA, RB RE, MoPac, Can Pac, PS, PRR, CB&Q, SOO LINE, D&RG, Great Northern, C&NW, AREA, ARA-A and ARA-B among others. Depending on your application they may even be suitable for 100 and 115 lb rail sections. Always consult with an engineer about your specific application.  Typically when punched for smaller rails we place one hole opossite the shoulder, with 2 in the shoulder allowing for 3 spikes to be used.

Kimes Steel's light rail tie plate of forged steel is used for 30 lb per yard ASCE rails. It protects the ties against wear and helps maintain gauge. The single shoulder design prevents outward expansion of the rails. This plate is 1/4" thick, 6" long and 4" wide, and is normally punched with four 7/16" spike holes, so that the rail base overlaps 1/16" of the holes. Tie plates of other widths and hole punching can be furnished upon request. Generally 3/8" spikes are recommended for 12 lb rail.

Kimes Steel's light rail tie plate of forged steel is used for 25 lb per yard ASCE rails. It protects the ties against wear and helps maintain gauge. The single shoulder design prevents outward expansion of the rails. This plate is 1/4" thick, 6" long and 4" wide, and is normally punched with four 7/16" spike holes, so that the rail base overlaps 1/16" of the holes. Tie plates of other widths and hole punching can be furnished upon request. Generally 3/8" spikes are recommended for 12 lb rail.